Ubiquiti Wave UISP Wave Access Point Full Duplex 60 GHz PtMP AP Powered by Wave Technology (White)

The Wave Access Point can connect up to 15 stations and deliver up to 5.4 Gbps total throughput (2.7 Gbps duplex). It is equipped with a high-performance 5 GHz backup radio to ensure uninterrupted connection, as well as a Bluetooth radio to simplify setup in the UISP Mobile app.

Highlights:

• 5.4 Gbps max. throughput (2.7 Gbps duplex)
  
• 30° sector coverage
  
• 5 GHz 800+ Mbps weather-resilient backup radio
  
• (1) 2.5 GbE and (1) 10G SFP+ WAN ports
  
• 15 client capacity:
  — Wave Long-Range (8 km link range)
  — Wave Nano (5 km link range)
  
• Integrated GPS & Bluetooth

Specifications:

• Dimensions: 212 x 205 x 187 mm (8.3 x 8.1 x 7.4")
  
• Weight: 2.3 kg (5.07 lb)
  
• Enclosure materials: Aluminum alloy, UV stabilized polycarbonate
  
• Pole mount diameter: 25 to 76 mm (1 to 3") on pipe outer diameter
  
• Wind loading: 98 N at 200 km/h (22 lbf at 125 mph)
  
• Weatherproofing: IPX6
  
• Processor: Quad ARM Cortex-A53 cores at 1.4 GHz
  
• Memory: DDR3L 512 MB
  
• Networking interface: (1) 2.5GbE RJ45 port (100/1000/2500)* (* Active only when SFP+ port is down); (1) 10G SFP+ port (1/10)
  
• Max. power consumption: 24W
  
• Power method: 48V DC passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-) or 2-pairs (4, 5+; 7, 8-); 24V DC passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-)
  
• Power supply: 48V DC, 0.65A 2.5GbE PoE adapter (included)
  
• GPS: Yes
  
• Button: Factory reset
  
• LEDs: Power, Ethernet, GPS
  
• Operating temperature: -40 to 60° C (-40 to 140° F)
  
• Operating humidity: 5 to 95% noncondensing
  
• Certifications: FCC, IC, CE
  
• OS: airOS
  
• Operating mode: PtMP access point
  
• Ubiquiti specific features: Wave AI, discovery protocol
  
• Services: UISP, ping watchdog, NTP client, SNMP
  
• Tools: Antenna alignment, discovery utility, ping, trace route, speed test
  
• Network: Bridge mode
  
• Software management: Bluetooth management for easy setup over UISP Mobile app; WEB UI
  
• Minimum software requirements: Any modern web browser/iOS or Android based smartphone
  
• Total throughput: 5.4 Gbps (2.7 Gbps duplex)
  
• Supported clients count: 15
  
• Range: Connecting to a Wave Long-Range: up to 8 km; Connecting to a Wave
• Nano: up to 5 km
  
• Encryption: WPA2-PSK (AES)
  
• RF: Operating frequency* (*Depends on regulatory region): 57 to 71 GHz
  
• Channel bandwidth: 2160, 1080 MHz
  
• Operating channels* (*Depends on regulatory region): 58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69120, 70200 MHz
  
• Modulation: 16QAM, QPSK
  
• Antenna gain: 24 dBi
  
• Polarization: Vertically linear
  
• Beamwidth: Azimuth: 30°; Elevation: 3 dB 3°, 6 dB 4°
  
• Electrical downtilt: 0°
  
• Back-Up RF:
  
• WiFi standard: 802.11ax (WiFi 6)
  
• Operating frequency* (*Depends on regulatory region): US/CA: U-NII-1 5150 - 5250 MHz, U-NII-2A 5250 - 5350 MHz, U-NII-2C 5470 - 5725 MHz, U-NII-3 5725 - 5850 MHz; Worldwide: 5150 - 5875 MHz
  Channel bandwidth: 20, 40, 80 MHz
  
• Modulation: BPSK (1⁄2), QPSK (1⁄2), QPSK (3⁄4), 16QAM (1⁄2), 16QAM (3⁄4), 64QAM (2⁄3), 64QAM (3⁄4), 64QAM (5⁄6), 256QAM (3⁄4), 256QAM (5⁄6), 1024QAM (3⁄4), 1024QAM (5⁄6)
  
• Antenna gain: 12 dBi
  
• Cross-pol isolation: 10 dB
  
• Electric downtilt: 0°
• LEDs:
  Power Flashing white: bootup in progress
  White: not connected to UISP application
  Blue: connected to UISP application
  Flashing blue: locate in progress
  Blue/white: firmware upgrade in progress
  Ethernet Flashing white: Ethernet traffic detected
  Flashing blue: SFP+ traffic detected
  GPS Blue: receiving at least (4) GPS satellite signal